Posted by Admin on Thursday, November 04, 2010 in water softener system, water softeners | No comments
The device transformed hard water into a soft water. Hard water contained calcium and magnesium metal and sometimes with bicarbonates and sulfates. On the other hand, soft water containing little or no minerals mentioned above.
The process is to decrease the calcium, magnesium, manganese and ferrous iron. Softener is a system transforming chemically hard water into a soft water.
Softeners replace calcium and magnesium in hard water by sodium. Sodium does not accumulate in the pipes and does not react to soap. This means that the effects of hard water are eliminated. The principle of the softening system is easy to understand. Hard water is allowed to enter the water softener. It contains a layer of plastic beads and in some cases, the material used is called zeolite. The layer of materials inside the water softener is soaked with sodium ions. Sodium is exchanged with the contents of hard water, calcium and magnesium. When the water exits the softener, water is said to be a soft water.
At one point in time, the plastic beads or a layer of zeolite is saturated with calcium and magnesium ions only. Regeneration process follows wherein water is mixed with the sodium content of high production of strong brine. The sodium ions replace calcium and magnesium ions, which are eventually washed down the drain.
When installed with domestic or household purposes, the softening system is at the main entrance of the piping system of the house. In this type of installation, all water entering the house is treated.
There are two main types of water softener systems. One is the single tank electric softener. This type, besides being expensive, is a system with some setbacks. Soft water supply may run out as the system uses a single tank. It can also cause discomfort, because this type needs high pressure. Night hours bring high pressure. The noise caused by the running motors is not welcome in these times.
The hydraulic twin tank softener is the other type of softener. This type ensures a continuous supply of fresh water for the home. The two tanks make the process of softening and regeneration as an alternative. Thus, there is no possibility of running out of soft water supply.
Salt containers should be refilled regularly. Most softening system has no level indicator. It is a wise decision to periodically check the level of salt to prevent contamination of water tanks. The softening is running continuously, even without salt, which can result in contamination of the tank.
Salt-based water softener systems are not one hundred percent effective. Only 75 percent of the calcium and magnesium content in water is removed. Salt-based softener also releases to the environment of large amounts of lime pickle.
A new developed water softening system is digital. Soo~Soft Digital Electronic Water Softening System is a revolutionary innovation in water-softening processes. It is environmentally friendly and as effective as a salt-type water softener.
0 Comments:
Post a Comment