Wednesday, November 3, 2010

Whole house water filtration

Whole House Water Filtration Systems

Installing a set of the water filtration system of the house may solve a series of problems affecting water quality. Taste and appearance of drinking water have been improved through filters that remove chlorine and sediment. If you find that your laundry detergent does not work well in the washing machine or dishwasher spots on glasses, you can benefit from a system that removes the minerals that cause hard water. Before deciding on a system, there are some things you should know about the whole house water filtration system.


Filtration System removes contaminants from your water through a filter connected to the main water line. Any water that comes into your home passes through the filter before being sent to the faucets, toilets and household appliances. Two more filters were installed, but rather may be needed for larger homes. If sediment or chemical is not detected by the first filter, the second filter removes it. Filters should be replaced periodically.


The types of pollutants will be removed from the water varies depending on if you get water from a municipal system or a well or spring. If you have well or spring water, you may have to remove sediment, which is dirt, rust, sand or dust visible in the water. A well may also contain minerals such as iron and calcium and magnesium. These minerals cause "hard" water, resulting in scale deposits in pipes.

If you have municipal water, you have to remove sediment, minerals and chemicals such as chlorine used to treat the water. Your water company can provide an analysis of the contaminants found in their waters, but if you have well water or spring, you will pay a laboratory to test their water.


Once you have determined which pollutants should be removed, you may decide on a system. If you have a problem with sediment, it takes a series of progressively smaller filters to remove any dirt or sand. If chlorine is the main pollutant, carbon filtration system to remove the chemical from your water. A neutralizing filter can treat the water or corrosive acids, while reverse osmosis can be used to eliminate parasites and viruses. If hard water is its only concern, you may want to purchase a water softening system instead of a filtration system.


A whole house water filtration system can be costly, due to installation costs and the need to continually buy replacement cartridges. Before deciding to purchase a system, should take a look at your water needs and decide if the whole house system is what you really need. You may decide that you do not need filtered water in your bathroom and only on the faucets. No matter what system you choose, make sure the installer has the experience and service to the installation of that particular system and that the system meets national standards for water filtration.


A whole house system eliminates the need to buy bottled water if the water tastes bad. It also increases the life of your plumbing system. While the water is from a municipal source, there can be a malfunction in the treatment process, exposing the contaminants. A whole house water filtration system provides you an additional protection for your family.

Having a whole house system also protects you from exposure to chlorine from your shower. When you turn the shower, the warm water facilitates the release of chlorine gas in the air. This gas can irritate the skin and lungs, which is a concern if someone in your household has allergies or asthma. Because a whole house system removes chlorine at the point where water enters your home, you no longer have to worry about chlorine exposure from any faucet.